Radial arm saw with 12" Blade and 24" Crosscut, 3HP 3 Phase

The rocker saw is a more versatile woodworking power tool. The basic design of the radial arm saw allows the saw blade to move vertically, and the saw frame is mounted on the saw frame and supported by an arm. The yoke holds the motor and the blade, allowing bevel cuts from 0 degrees to 90 degrees. The domestic worker's rocker saw is an ideal tool for cutting bevels, bevels and compound angles. Most rocker saws come with a stand, strong enough to handle torn wood, although not as easy as a bench saw. However, the versatility of the rocker saw makes it an ideal tool for most home renovation projects, such as trimming, shaping, and door frames. Radial arm saws are also very useful for crosscutting and adapt to accessories and different blades, such as a wall knife for cutting grooves. Some accessories include rotary planers and sanding and polishing wheels. If you are buying a rocker saw that intends to use attachments, you need to make sure that the brand and model have a shaft that can accept attachments, and that you are buying attachments made for your saw. The size of the radial arm saw you find in most home improvement stores will be 8 inches (20.3 cm) to 12 inches (30.5 cm). This refers to the diameter of the saw blade. Most brands and models are 10 inches (25.4 cm), which is the most common size used in households. The price of a rocker saw ranges from $600 to $1,000, depending on the brand and model. Although the radial arm saw is a versatile power tool, some woodworkers prefer the compound herringbone saw.
Due to the different sawing requirements for various workpieces, there are many types of saws, such as frame saws, cross saws, knife saws, side saws and panel saws. Frame saw is also called frame saw, which consists of saw blade, saw button, handle, saw beam, tension rope and pattern board. According to its purpose, it can be divided into straight saw and cutting saw. Down saw is used to cut along the wood grain longitudinally, and the cutting saw is used to cut horizontal wood grain. Frame saws can be divided into rough saws, fine saws, round saws, middle saws and large saws according to the length and pitch of their saw blades. Rough saws are mainly used for thick wood, fine saws are used for joinery and tenoning, shoulder pulling, etc., round saws are mainly used for sawing arcs or curves, and middle saws are used for sawing thinner wood or tenoning. , The big saw is mainly used to saw large materials (round wood or large square wood) into boards or small square materials. Knife saws can be divided into single-blade knife saws, double-blade knife saws and clamp-back knife saws according to their different forms. Single-blade saws have teeth on one side, and are divided into straight saws and cut saws according to the function of the toothed edge. The double-edged knife saw has toothed edges on both sides, one side is a straight saw, and the other side is a cutting saw. The saw back of the clamp-back saw is clamped straight with a steel bar, and the saw teeth are thinner. There are two types of sawing and cutting. The advantage of the knife saw is that the sawing line is straight and it can saw a larger area of ​​the board. The horizontal saw is also called the dragon saw, which needs to be pushed and pulled by two people and can be used for cutting wood. Side saws, also called slot saws, are mainly used for grooving wood. Panel saws, also known as hand saws, are mainly used for sawing wider wooden boards. The narrow hand saw, also known as the tail saw, is mainly used for sawing small holes. A wire saw is also called a bow saw. Its handle is bent into a bow with thick bamboo, beef tendon or thick rattan. The saw blade has a diameter of 1 to 1.5 mm and is chiseled with serrated steel wires. It can be used for sawing complex curves or opening holes.